Vacuum Assembler Open the assembler
Vacuum Assembler › Parts › CF 6.0″ viewport
CF 6.0″ viewport 3D model
Viewports and feedthroughs

CF 6.0″ viewport

1 × CF 6.0″ ConFlat flange, 202 cm³ of internal volume and 186.6 cm² of wetted surface.

Build a system with this part

Blanks seal a port; their inside face still counts as surface area for outgassing in the pumpdown simulation.

Specifications

TypeViewport
Flanges1 × CF 6.0″ ConFlat (CF), knife-edge, copper gasket
Ports1
Internal gas volume202 cm³ (0.202 L)
Wetted surface area186.6 cm²
MaterialStainless 304
Overall size217 × 152 × 60 mm
Outgassing (unbaked, 1 h)6.0e-9 Torr·L/s/cm²
Simulation-readyNot yet

Volume and surface area are computed from the CAD model's enclosed gas space. Material outgassing values are typical published figures.

Parts that mate with CF 6.0″ flanges

CF 6.0″ 6-port multiport chamber CF 6.0″ 6-port multiport chamberCF 6.0″ · 2,224 cm³CF 6.0″ 6-port box chamber CF 6.0″ 6-port box chamberCF 6.0″ · 2,243 cm³CF 6.0″ feedthrough CF 6.0″ feedthroughCF 6.0″CF 6.0″ blank flange CF 6.0″ blank flangeCF 6.0″CF 6.0″ to CF 4.5″ reducer CF 6.0″ to CF 4.5″ reducerCF 6.0″ / CF 4.5″ · 556 cm³CF 6.0″ to CF 2.75″ zero-length reducer CF 6.0″ to CF 2.75″ zero-length reducerCF 6.0″ / CF 2.75″ · 33 cm³CF 10.0″ to CF 6.0″ reducer CF 10.0″ to CF 6.0″ reducerCF 10.0″ / CF 6.0″ · 991 cm³CF 13.25″ to CF 6.0″ zero-length reducer CF 13.25″ to CF 6.0″ zero-length reducerCF 13.25″ / CF 6.0″ · 300 cm³